1/4″ Micro-Fittings

1/4″ Micro-fittings are used to make connections between 1/4″ micro-tubing or to connect 1/4″ micro-tubing or 1/4” dripperline to 1/2″ or 3/4″ poly supply tubing. Made with an engineering grade resin, these fittings include a sharp edge (known as a barb) that bites into the inside of the tubing for a secure and watertight fit. No glue or adhesive is required.

These 1/4″ micro-fittings come in a variety of configurations including long connectors, short connectors, tees, elbows, crosses, and plugs to offer a lot of flexibility when installing a drip system.

These fittings can be used with both poly and vinyl micro-tubing.

When attaching a 1/4″ micro-fitting to solid 1/2” or 3/4” poly tubing, use a Hole Punch to pre-punch a clean hole into the tubing.

When removing a 1/4″ barbed micro-fitting from 1/2″ or 3/4″ tubing, use a goof plug to plug that hole.

SKU: FC250, FBB250, FT250, FEL250, FX250, FGP2, FBP250


  • Secure and easy installation without glue or clamps
  • Large inside diameter for maximum flow
  • Sharp barb for excellent adhesion
  • Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions
  • Fits standard 1/4″ (0.160″ – 0.170″ ID) poly or vinyl tubing
  • Threaded goof plug fits standard rigid risers (0.160″ ID x 0.300″ OD)


  • Operating pressure: 45 PSI max


1/4″ fittings can be used with standard 1/4″ (0.160″ ID to 0.170″ ID) poly or vinyl tubing and 1/2″ or 3/4″ supply tubing. If installing directly in to 1/2″ or 3/4″ supply tubing, any of our hole punches may be used to punch the hole.

Threaded goof plug fits standard rigid risers (0.160″ ID x 0.300″ OD)

Ready To Make The Reliable & Economical Choice?

Contact Our Sales Team