Take Apart Flag Emitters

Take Apart Flag Emitters can be taken apart for easy cleaning.  Attach to either 1/2″ supply tubing or 1/4″ distribution tubing. To prevent dirt from entering drip emitter, 6″ support stake may be used to keep emitter and end of tubing up off the ground. Works well at low pressures.

Features

  • Locking ring prevents emitter from coming apart during operation.
  • Emitter can be taken apart for easy cleaning
  • Outlet barb for use with 1/4″ distribution tubing
  • Spiral flow through a large water flow passage reduces likelihood of clogging
  • Resistant to chemicals and fertilizers used in landscape application
  • Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions
  • Color coded for easy flow rate identification

Specifications

  • 1 gph color code – black
  • 2 gph color code – light green or blue
  • 4 gph color code – yellow or dark green
  • Operating pressure: 15-40 psi
  • Inlet size: 1/4″ barb
  • Outlet size: 1/4″ barb
  • Filter requirement: minimum of 150 mesh
  • Barbs fit 0.160″ to 0.170″ ID tubing

Take Apart Flag Emitters
DISCHARGE RATES

Part No. 15 psi 25 psi 40 psi
ETA10 1.2 gph 1.6 gph 2.1 gph
ETA20G/ETA20B 2.0 gph 2.6 gph 3.4 gph
ETA40Y/ETA40G 4.0 gph 5.2 gph 6.8 gph

USE WITH

Can be used with 1/4″ micro-tubing and 1/2″ or 3/4″ supply tubing. If installing directly in to 1/2″ or 3/4″ supply tubing, emitter can be inserted directly without use of a hole punch. If installed like this, 1/4″ micro-tubing may be attached to emitter outlet and routed to plant. Also, a bug plug may be used to protect end of micro- tubing from bugs entering tubing. To prevent dirt from entering drip emitter, a 6″ support stake may be used to keep emitter and end of tubing up above the ground.

Ready To Make The Reliable & Economical Choice?

Contact Our Sales Team