Barbed Fogger

The barbed fogger has a bigger droplet size than the threaded mister and is mostly used for propogation or to add humidity.

Features

  • Barbed inlet for installation into 1/2″ and 3/4″ supply tubing or 1/4″ distribution tubing.
  • Product may be taken apart using a 1/2″ wrench for easy clean out of debris
  • Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions

Specifications

  • Operating pressure: 30-60 PSI
  • Cone angle: 30 degrees at 45 psi
  • Inlet size: 1/4″ barb (fits standard 1/4″ poly or vinyl tubing)
  • Filter requirement: minimum of 150 mesh

BARBED FOGGER
DISCHARGE RATES (GPH)

Part No. 30 psi 45 psi 60 psi
EMB30 3.5 gph 4.2 gph 5.2 gph

 

USE WITH

Can be used with standard 1/4″ poly or vinyl tubing or inserted directly in to 1/2″ or 3/4″ supply tubing. If installing directly in to 1/2″ or 3/4″ supply tubing, a hole punch may be used to punch a hole.

Ready To Make The Reliable & Economical Choice?

Contact Our Sales Team