A variety of plastic stakes are available that either secure the tubing to the ground or to elevate and securely hold a rigid risers or feeder tube.

The 6″ Cleated Plastic J-stake is designed to hold 1/2” drip irrigation tubing in place and is usually installed every 5 to 10 feet. To install, simply layout your drip tubing and place the stake base next to the tubing. Then push the drip irrigation stake down into the soil.

The 6” Plastic Support Stake is used to prevent dirt from entering emitters by keeping the emitter and end of 1/4″ or 1/8″ tubing up off the ground.

The 8″ Plastic Rigid Riser Stake has a 1/4″ barbed side inlet for 1/4″ micro-tubing and accepts a rigid riser (0.160″ ID x 0.300″ OD).

The 13″ Plastic Stake securely holds feeder tubes.