- Secure and easy installation without glue or clamps
- Color coded for easy size identification
- Large inside diameter for maximum flow
- Four sizes to fit 1/2″ or 3/4″ drip tubing (from 0.620″ to 0.940″ OD tubing)
Compression fittings are among the most common connection style fittings used in drip irrigation systems to connect 1/2″ or 3/4″ poly supply tubing or dripperline. Compression fittings have an internal compression ring that squeezes the outside diameter of the tubing as it is inserted into the fitting. The sharp edge of the ring bites into the outside of the tubing to prevent the tubing from blowing off. This creates a water tight seal. Compression fittings are more of a permanent connection and are not recommended for reuse. Once the tubing is inserted into the fitting it is very hard to remove the tubing. The compression fittings are available to fit a range of tubing from ½” to ¾” and all are color coded to indicate the appropriate tubing outside diameter they fit. The range of compression fittings includes couplings, tees, swivel tees, elbows, swivel elbows, hose and pipe thread swivel adapters, male hose and pipe thread adapters, spigot adapters and end plugs.
Operating pressure: 45 PSI max
Can be used with 1/2″ or 3/4″ drip tubing with outside diameters ranging from 0.620″ to 0.940″.